Cisco Cisco Aironet 1810 OfficeExtend Access Point Guía De Instalación
21
Figure 9
Back of the AP with Factory-Fitted Cover Removed
1
10/100/1000BASE-T PoE uplink port is
connected to the Passive Pass-Through port
using a factory-installed RJ-45 jumper cable.
connected to the Passive Pass-Through port
using a factory-installed RJ-45 jumper cable.
Do not remove this jumper cable.
2
Passive Pass-Through port.
RJ-45, from the back of the AP to the base of
the AP.
the AP.
3
Mode button.
For more details, see
4
Recess for the hook feature of the back cover.
The back cover is factory-installed and needs
to be removed only for accessing the
Mode button.
to be removed only for accessing the
Mode button.
354682
1
2
4
3