Cisco Cisco Aironet 2800i Access Point Guía De Instalación
14
6
Preparing the AP for Installation
Before you mount and deploy your access point, we recommend that you perform a site survey (or use
the site planning tool) to determine the best location to install your access point.
the site planning tool) to determine the best location to install your access point.
You should have the following information about your wireless network available:
•
Access point locations.
•
Access point mounting options: below a suspended ceiling, on a flat horizontal surface, or on a
desktop.
desktop.
Note
You can mount the access point above a suspended ceiling but you must purchase
additional mounting hardware: See
additional mounting hardware: See
for additional information.
•
Access point power options: PoE+ or Cisco Power Injector AIR-PWRINJ6=.
Cisco recommends that you make a site map showing access point locations so that you can record the
device MAC addresses from each location and return them to the person who is planning or managing
your wireless network.
device MAC addresses from each location and return them to the person who is planning or managing
your wireless network.
7
Installation Overview
Installing the access point involves these operations:
Step 1
(optional)
Step 2
Step 3
Step 4