Cisco Cisco Aironet 1810w Access Point Guía De Instalación
32
12
Checking the Access Point LEDs
Access Point Status LEDs
The location of the access point status LED is shown in
. For privacy, the status LED is
automatically turned off when the access point joins a controller.
When the AP is mounted on a horizontal surface in the AIR-OEAP1810-CRD= cradle kit, the status
LED is present on the cradle as shown in
LED is present on the cradle as shown in
.
Note
Regarding LED status colors, it is expected that there will be small variations in color intensity
and hue from unit to unit. This is within the normal range of the LED manufacturer’s
specifications and is not a defect.
and hue from unit to unit. This is within the normal range of the LED manufacturer’s
specifications and is not a defect.
The access point status LED indicates various conditions and are described in
.
Table 2
LED Status Indications
Message Type
LED State
Possible Messages and Meanings
Boot loader status
sequence
sequence
Blinking Green
DRAM memory test in progress
DRAM memory test OK
Board initialization in progress
Initializing flash file system
Flash memory test OK
Initializing Ethernet
Ethernet OK
Starting Cisco IOS
Initialization successful
Association status
Chirping Green
Normal operating condition. AP has joined to a
controller, but no wireless client has associated
with the AP.
controller, but no wireless client has associated
with the AP.
Green
Normal operating condition. At least one wireless
client association is present.
client association is present.