Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Instalación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Initial System Configuration
Enable CLI Timestamping ▀
ASR 5500 Installation Guide ▄
133
Enable CLI Timestamping
To display a timestamp (date and time) for every command that is executed on the CLI, enter the timestamps command
at the root prompt for the Exec mode:
at the root prompt for the Exec mode:
[local]host_name# timestamps
Immediately after you execute the command, the date and time appear.
Save the Basic Configuration
Save this basic system configuration information to a file locally. The following procedure saves the configuration file
to flash memory in the MIO/UMIO.
to flash memory in the MIO/UMIO.
Step 1
You must be at the root prompt for the Exec mode to save the configuration file.
[local]host_name#
Step 2
To save your current configuration, enter the following command:
[local]host_name# save configuration /flash/system.cfg
This completes the basic configuration process.
Additional Configuration Tasks
Establishing the basic configuration allows an operator to access the ASR 5500 for management purposes. Additional
configuration settings are required for full operational deployment within a provider network. To complete these tasks,
refer to the following documents:
configuration settings are required for full operational deployment within a provider network. To complete these tasks,
refer to the following documents:
System Administration Guide
Command Line Interface Reference
Administration Guide specific to the type of product being deployed.
StarOS Release Notes