Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Context Configuration Mode Commands
▀ l2tp peer-dead-time
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
l2tp peer-dead-time
Configures a delay for attempting to tunnel to a specific peer which is initially unreachable due to reasons such as a
network issue or temporarily having reached its capacity.
network issue or temporarily having reached its capacity.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Rests the command to it‘s default setting of 60.
seconds: Must be an integer value from 5 to 64,000.
Default: 60
Default: 60
Usage
The time to wait before trying to establish a tunnel to a known peer after the initial attempt was unsuccessful.
Example
The following example configures the delay in attempting to tunnel to a temporarily unreachable peer. The delay is set
to 120 seconds in this example.
The following example configures the delay in attempting to tunnel to a temporarily unreachable peer. The delay is set
to 120 seconds in this example.