Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Context Configuration Mode Commands
▀ lma-service
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
lma-service
Creates an Local Mobility Anchor (LMA) service or specifies an existing LMA service and enters the LMA service
configuration mode for the current context.
configuration mode for the current context.
Product
P-GW
Privilege
Administrator
Syntax
Specifies the name of the LMA service. If
does not refer to an existing service, the new
service is created if resources allow.
must be from 1 to 63 alpha and/or numeric characters.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Removes the specified LMA service from the context.
Usage
Enter the LMA service configuration mode for an existing service or for a newly defined service. This
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
Caution:
Large numbers of services greatly increase the complexity of management and may impact overall
system performance (for example, resulting from such things as system handoffs). Therefore, it is recommended that a
large number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
large number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
Entering this command results in the following prompt:
[
[
]
(config-lma-service)#
LMA Service Configuration Mode commands are defined in the LMA Service Configuration Mode
Commands chapter.
Use this command when configuring the following eHRPD and PMIP SAE components: P-GW.
Commands chapter.
Use this command when configuring the following eHRPD and PMIP SAE components: P-GW.
Example
The following command enters the existing LMA service configuration mode (or creates it if it doesn‘t already exist) for
the service named
The following command enters the existing LMA service configuration mode (or creates it if it doesn‘t already exist) for
the service named
: