Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Crypto Template IKEv2-PDIF Payload Configuration Mode Commands
tsi ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
tsi
Configures the IKEv2 Initiator Traffic Selector (TSI) payload address options.
Product
PDIF
Privilege
Security Administrator, Administrator
Syntax
Configures the TSi payload to allow all all IP addresses.
Configures the TSi payload start-address to be that of the Mobile endpoint. This is the default value.
is the mobile endpoint netmask.
Usage
On receiving a successful IKE_SA_INIT Response from PDIF, the MS sends an IKE_ AUTH Request for the
first EAP-AKA authentication. If the MS is capable of doing multiple-authentication, it includes the
MULTI_AUTH_SUPPORTED Notify payload in the IKE_AUTH Request. MS also includes an IDi payload
containing the NAI, SA, TSi, TSr, and CP (requesting IP address and DNS address) payloads.
first EAP-AKA authentication. If the MS is capable of doing multiple-authentication, it includes the
MULTI_AUTH_SUPPORTED Notify payload in the IKE_AUTH Request. MS also includes an IDi payload
containing the NAI, SA, TSi, TSr, and CP (requesting IP address and DNS address) payloads.
Example
Use the following example to configure a TSi payload that allows all addresses:
Use the following example to configure a TSi payload that allows all addresses: