Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Crypto Template IKEv2-PDIF Payload Configuration Mode Commands
▀ tsr
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
tsr
Configures the IKEv2 Responder Traffic Selector (TSr) payload address options.
Product
PDG/TTG
Privilege
Security Administrator, Administrator
Syntax
Configures the TSi payload to include the TSr start IPv4 address of an address range for the Phase 1 multiple
traffic selector feature.
traffic selector feature.
Configures the TSi payload start-address to include the TSr end IPv4 address of an address range for the
Phase 1 multiple traffic selector feature.
Phase 1 multiple traffic selector feature.
Usage
As part of Phase 1 of the Multiple Traffic Selector feature, this command is used to specify an IPv4 address
range in the single TSr payload that the PDG/TTG returns in the last IKE_AUTH message. This TSr is Child
SA-specific.
range in the single TSr payload that the PDG/TTG returns in the last IKE_AUTH message. This TSr is Child
SA-specific.
Example
Use the following example to configure a TSr payload that specifies an IPv4 address range for the payload:
Use the following example to configure a TSr payload that specifies an IPv4 address range for the payload: