Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Diameter Endpoint Configuration Mode Commands
route-failure ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
route-failure
This command controls how action after failure or recovery after failure is performed for the route table.
Product
GGSN, ECS
Privilege
Security Administrator, Administrator
Syntax
Disables the route-failure configuration.
Configures the default setting for the specified parameter.
Specifies the time duration, in seconds, for which system keeps the route FAILED status. When this time
expires, the system changes the status to AVAILABLE.
expires, the system changes the status to AVAILABLE.
must be the deadtime duration, in seconds, and must be an integer from 1 through 86400.
Default: 60 seconds
Specifies how to reset the failure counter when provisionally changing the status from FAILED to
AVAILABLE.
For example, if a failure counter of 16 caused the status to change to FAILED. After the configured deadtime
expires, the status changes to AVAILABLE. If this keyword is configured with 75 percent, the failure counter
will be reset to 12, i.e., 75 percent of 16.
AVAILABLE.
For example, if a failure counter of 16 caused the status to change to FAILED. After the configured deadtime
expires, the status changes to AVAILABLE. If this keyword is configured with 75 percent, the failure counter
will be reset to 12, i.e., 75 percent of 16.
must be the value in percentage of the counter which caused FAILED, and must be an integer
from 1 through 99.
Default: 90 percent
Default: 90 percent
Configures which answer messages are to be treated as failures, in addition to requests that time out.
Up to 16 different result codes can be specified.
Up to 16 different result codes can be specified.
must be an integer from 0 through 4,294,967,295.
Default: N/A