Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Diameter Endpoint Configuration Mode Commands
tls ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
tls
This command enables/disables the Transport Layer Security (TLS) support between a Diameter client and Diameter
server node.
server node.
Product
ECS
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: Disables the TLS support at Diameter endpoint.
Default: Disables the TLS support at Diameter endpoint.
Specifies the certificate for TLS support.
must be an encrypted certificate, and must be an alpha and/or numeric string of 700 through
900 characters in length.
Specifies the password for TLS support.
must be an encrypted password, and must be an alpha and/or numeric string of 6 through 50
characters in length.
Specifies the private key for TLS support.
must be an encrypted key, and must be an alpha and/or numeric string of 900 through 1500
characters in length.
Usage
Use this command to configure TLS support between a Diameter client and Diameter server node. By default,
TLS is disabled.
TLS is disabled.
Important:
Both the Diameter client and server must be configured with TLS enabled or TLS disabled;
otherwise, the Diameter connection will be rejected.
Example
The following commands enable the TLS between a Diameter client and Diameter server node:
The following commands enable the TLS between a Diameter client and Diameter server node: