Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
threshold contfilt-rating ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
threshold contfilt-rating
Configures the threshold for Content Filtering rating operations performed during a polling interval at which the
threshold are raised or cleared.
threshold are raised or cleared.
Product
CF
Privilege
Security Administrator, Administrator
Syntax
Default: 90
The high threshold for number of rating operations performed for content filtering service that must be met or
exceeded at the end of the polling interval to generate an alert or alarm.
The high threshold for number of rating operations performed for content filtering service that must be met or
exceeded at the end of the polling interval to generate an alert or alarm.
is measured in numbers of total rating operations performed and can be configured to any
integer value between 0 and 100. A value of 0 disables the threshold.
Default: 0
The low threshold for the total number of rating operations performed for a content filtering service that
maintains a previously generated alarm condition. If the threshold falls below the low threshold within the
polling interval, a clear alarm is generated.
The low threshold for the total number of rating operations performed for a content filtering service that
maintains a previously generated alarm condition. If the threshold falls below the low threshold within the
polling interval, a clear alarm is generated.
is measured in umber of total rating operations performed and can be configured to any
integer value between 0 and 100. A value of 0 disables the threshold.
Usage
Use this command to configure the threshold for a content filtering service to generates alerts or alarms based
on the number of rating operations performed for a content filtering service during the polling interval.
If a trigger condition exists at the end of the polling interval, the alert or alarm will not be generated until the
end of the polling interval.
Refer to the
on the number of rating operations performed for a content filtering service during the polling interval.
If a trigger condition exists at the end of the polling interval, the alert or alarm will not be generated until the
end of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Example
The following command configures a threshold of
The following command configures a threshold of
percent of total rating operations performed and a clear threshold
of
percent: