Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
▀ threshold cpu-utilization
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
threshold cpu-utilization
Configures thresholds for CPU utilization for the system.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Default: 85
The high threshold CPU utilization percentage that must be met or exceeded within the polling interval to
generate an alert or alarm.
The high threshold CPU utilization percentage that must be met or exceeded within the polling interval to
generate an alert or alarm.
can be configured to any integer value between 0 and 100.
Default: 85
The low threshold CPU utilization percentage that maintains a previously generated alarm condition. If the
utilization percentage falls below the low threshold within the polling interval, a clear alarm will be
generated.
The low threshold CPU utilization percentage that maintains a previously generated alarm condition. If the
utilization percentage falls below the low threshold within the polling interval, a clear alarm will be
generated.
can be configured to any integer value between 0 and 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
CPU utilization thresholds generate alerts or alarms based on the utilization percentage of each PSC/PSC2
CPU during the specified polling interval. Although, a single threshold is configured for all CPUs, separate
alerts or alarms can be generated for each CPU.
Alerts or alarms are triggered for CPU utilization based on the following rules:
CPU during the specified polling interval. Although, a single threshold is configured for all CPUs, separate
alerts or alarms can be generated for each CPU.
Alerts or alarms are triggered for CPU utilization based on the following rules:
Enter condition: Average measured CPU utilization for last 5 minutes ³ High Threshold
Clear condition: Average measured CPU utilization for last 5 minutes < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Important:
This command is not supported on all platforms.
Example