Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
APN Configuration Mode Commands
▀ firewall policy
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
firewall policy
This command enables/disables Stateful Firewall support for the APN.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables Stateful Firewall support for this APN.
Configures the default setting for Stateful Firewall support.
Default: Disabled
Default: Disabled
Enables Stateful Firewall support for this APN.
Usage
Use this command to enable or disable Stateful Firewall support for this APN.
Important:
This command is only available in StarOS 8.0. In StarOS 8.1 and later, this configuration is available
in the Rulebase Configuration Mode.
Important:
Unless Stateful Firewall support for this APN is enabled using this command, firewall processing for
this APN is disabled.
Important:
If firewall is enabled, and the rulebase has no firewall configuration, Stateful Firewall will cause all
packets to be discarded.
Example
The following command enables Stateful Firewall support for this APN:
The following command enables Stateful Firewall support for this APN:
The following command disables Stateful Firewall support for this APN: