Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
APN Configuration Mode Commands
▀ fw-and-nat policy
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
fw-and-nat policy
This command configures the Firewall-and-NAT policy to be used for subscribers who use this APN.
Product
FW, NAT
Privilege
Security Administrator, Administrator
Syntax
Specifies that the default Firewall-and-NAT policy configured in the rulebase be used for subscribers who
use this APN.
use this APN.
Disables Firewall and NAT for the APN.
Specifies the Firewall-and-NAT policy for the APN.
must be an alpha and/or numeric string of 1 through 63 characters in length. Note that
this policy will override the
configured in the ACS rulebase.
Usage
Use this command to configure the Firewall-and-NAT policy for the APN. Note that the policy configured in
the subscriber mode will override the default policy configured in the ACS rulebase. If a policy is not
configured in the subscriber mode, the default policy configured in the ACS rulebase will be used.
the subscriber mode will override the default policy configured in the ACS rulebase. If a policy is not
configured in the subscriber mode, the default policy configured in the ACS rulebase will be used.
Important:
This command is customer-specific and is only available in StarOS 8.1.
Important:
This command must be used to configure the Policy-based Firewall-and-NAT feature.
Example
The following command configures a Firewall-and-NAT policy named
The following command configures a Firewall-and-NAT policy named
for the APN: