Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
threshold subscriber total ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
threshold subscriber total
Configures total subscriber thresholds for the system.
Product
PDSN, GGSN, HA
Privilege
Security Administrator, Administrator
Syntax
Default: 0
The high threshold number of subscriber sessions (active and dormant) facilitated by the system that must be
met or exceeded within the polling interval to generate an alert or alarm.
The number can be configured to any integer value between 0 and 100000. A value of 0 disables the
threshold.
The high threshold number of subscriber sessions (active and dormant) facilitated by the system that must be
met or exceeded within the polling interval to generate an alert or alarm.
The number can be configured to any integer value between 0 and 100000. A value of 0 disables the
threshold.
Default: 0
The low threshold number of subscriber sessions (active and dormant) facilitated by the system that maintains
a previously generated alarm condition. If the number of sessions falls beneath the low threshold within the
polling interval, a clear alarm will be generated.
The number can be configured to any integer value between 0 and 100000. A value of 0 disables the
threshold.
The low threshold number of subscriber sessions (active and dormant) facilitated by the system that maintains
a previously generated alarm condition. If the number of sessions falls beneath the low threshold within the
polling interval, a clear alarm will be generated.
The number can be configured to any integer value between 0 and 100000. A value of 0 disables the
threshold.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Total subscriber thresholds generate alerts or alarms based on the total number of subscriber sessions (active
and dormant) facilitated by the system during the specified polling interval.
Alerts or alarms are triggered for subscriber totals based on the following rules:
and dormant) facilitated by the system during the specified polling interval.
Alerts or alarms are triggered for subscriber totals based on the following rules:
Enter condition: Actual total number of subscriber sessions ³ High Threshold
Clear condition: Actual total number of subscriber sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Example
The following command configures an active subscriber high threshold count of
The following command configures an active subscriber high threshold count of
and a low threshold of
for an system using the Alarm thresholding model: