Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Global Configuration Mode Commands
threshold total-ggsn-sessions ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
threshold total-ggsn-sessions
Configures thresholds for the total number of GGSN sessions across all the services in the system.
Product
GGSN
Privilege
Security Administrator, Administrator
Syntax
Default: 0 (Disabled)
The high threshold number of total GGSN sessions across all the sessions in the system that must be met or
exceeded within the polling interval to generate an alert or alarm.
The number can be configured to any integer value from 0 through 4000000. A value of 0 disables the
threshold.
The high threshold number of total GGSN sessions across all the sessions in the system that must be met or
exceeded within the polling interval to generate an alert or alarm.
The number can be configured to any integer value from 0 through 4000000. A value of 0 disables the
threshold.
Default: 0 (Disabled)
The low threshold number of total GGSN sessions that maintains a previously generated alarm condition. If
the number of GGSN sessions falls beneath the low threshold within the polling interval, a clear alarm will be
generated.
The number can be configured to any integer value between 0 and 4000000. A value of 0 disables the
threshold.
The low threshold number of total GGSN sessions that maintains a previously generated alarm condition. If
the number of GGSN sessions falls beneath the low threshold within the polling interval, a clear alarm will be
generated.
The number can be configured to any integer value between 0 and 4000000. A value of 0 disables the
threshold.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Monitor and set alarms or alerts when the total number of GGSN sessions across all the services in the system
is equal to or greater than the set limit.
Alerts or alarms are triggered for the total number of GGSN sessions based on the following rules:
is equal to or greater than the set limit.
Alerts or alarms are triggered for the total number of GGSN sessions based on the following rules:
Enter condition: Actual total number of GGSN sessions ³ High Threshold
Clear condition: Actual total number of GGSN sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end
of the polling interval.
Refer to the
of the polling interval.
Refer to the
command to configure the polling interval and the
command to enable thresholding for this value.
Example
The following command configures a total GGSN session high threshold count of
The following command configures a total GGSN session high threshold count of
for an system using the Alert
thresholding model: