Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
ACS Rulebase Configuration Mode Commands
firewall no-ruledef-matches ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
firewall no-ruledef-matches
This command configures the default action for packets when no Firewall Ruledef matches.
Important:
In StarOS 8.0, this command is available in the ACS Configuration Mode. In StarOS 8.1 and StarOS
8.3, use this command for Rulebase-based Firewall-and-NAT configuration. In StarOS 8.1 and StarOS 9.0 and later, for
Policy-based Firewall-and-NAT configuration, use the
Policy-based Firewall-and-NAT configuration, use the
command available
in the Firewall-and-NAT Policy Configuration Mode.
Product
FW, NAT
Privilege
Security Administrator, Administrator
Syntax
Configures the default action for packets with no Firewall ruledef match.
Specifies the packet type:
: Downlink packets with no Firewall ruledef match.
Default:
: Uplink packets with no Firewall ruledef match.
Default:
Specifies the default action for packets with no Firewall ruledef match.
: Permit packets.
Important:
The
keyword is only available in StarOS 8.3 and later releases.
Optionally specify:
: Specifies to bypass Network Address Translation (NAT).
: Specifies a NAT realm to be used for performing NAT on
subscriber packets.
must be an alpha and/or numeric string of 1 through 31 characters in length.