Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
ACS Rulebase Configuration Mode Commands
firewall policy ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
firewall policy
This command enables/disables Stateful Firewall support for all subscribers using this rulebase.
Important:
In StarOS 8.0, this command is available in the APN/Subscriber Configuration Mode. In StarOS 8.1
and StarOS 8.3, use this command for Rulebase-based Firewall-and-NAT configuration. In StarOS 8.1 and StarOS 9.0
and later, for Policy-based Firewall-and-NAT configuration, this command is available in the Firewall-and-NAT Policy
Configuration Mode.
and later, for Policy-based Firewall-and-NAT configuration, this command is available in the Firewall-and-NAT Policy
Configuration Mode.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Configures the default firewall support setting for all subscribers using this rulebase.
Default: Disabled
Default: Disabled
Disables firewall support for all subscribers using this rulebase.
Enables firewall support for all subscribers using this rulebase.
Usage
Use this command to enable/disable firewall support for all subscribers using this rulebase.
Example
The following command enables Stateful Firewall support:
The following command enables Stateful Firewall support:
The following command disables Stateful Firewall support: