Cisco Cisco Packet Data Gateway (PDG) Manual De Mantenimiento
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
RADIUS Attribute Definitions
Attributes ▀
Cisco ASR 5000 Series AAA Interface Administration and Reference ▄
OL-22955-01
Opaque value
Volume-Threshold
Is generated by the PPS and indicates the volume (in octets) that be consumed before a new quota should be
requested.
requested.
Type
3
Length
4-12
Value
Opaque value
Duration-Quota
3GPP2 PrePaid Duration Quota. This is optionally present if duration-based charging is used. In RADIUS
Access-Accept message, it indicates the duration (in seconds) allocated for the session by the PPS. In an on-
line RADIUS Access-Accept message, it indicates the total duration (in seconds) since the start of the
accounting session related to the QuotaID of the PPAQ in which it occurs.
Access-Accept message, it indicates the duration (in seconds) allocated for the session by the PPS. In an on-
line RADIUS Access-Accept message, it indicates the total duration (in seconds) since the start of the
accounting session related to the QuotaID of the PPAQ in which it occurs.
Type
4
Length
4
Value
Unsigned integer
Duration-Threshold
3GPP2 PrePaid Duration Quota Threshold. This is optionally present if Duration-Quota is present in a
RADIUS Access-Accept message. It is generated by the PPS and indicates the duration (in seconds) that
should be consumed before a new quota should be requested. This threshold should not be larger than the
Duration-Quota.
RADIUS Access-Accept message. It is generated by the PPS and indicates the duration (in seconds) that
should be consumed before a new quota should be requested. This threshold should not be larger than the
Duration-Quota.
Type
5
Length
4
Value
Unsigned integer
Update-Reason
Reason for initiating online quota update operation. This should be present in the Authorize-Only RADIUS
Access-Request message. It indicates the reason for initiating the on-line quota update operation. Update
reasons 6, 7, 8, and 9 indicate that the associated resources are released at the client side, and that therefore
the PPS should not allocate a new quota in the RADIUS Access Accept message.
Access-Request message. It indicates the reason for initiating the on-line quota update operation. Update
reasons 6, 7, 8, and 9 indicate that the associated resources are released at the client side, and that therefore
the PPS should not allocate a new quota in the RADIUS Access Accept message.