Cisco Cisco Packet Data Gateway (PDG) Manual De Mantenimiento
RADIUS Attribute Definitions
▀ Attributes
▄ Cisco ASR 5000 Series AAA Interface Administration and Reference
OL-22955-01
Type
8
Length
1
Value
Enumerated integer. Supported values are:
Pre-Initialization = 1
Initial-Request = 2
Threshold-Reached = 3
Quota-Reached = 4
TITSU-Approaching = 5
Remote-Forced-Disconnect = 6
Client-Service-Termination = 7
Access-Service-Terminated = 8
Service-Not-Established = 9
One-Time-Charging = 10
Initial-Request = 2
Threshold-Reached = 3
Quota-Reached = 4
TITSU-Approaching = 5
Remote-Forced-Disconnect = 6
Client-Service-Termination = 7
Access-Service-Terminated = 8
Service-Not-Established = 9
One-Time-Charging = 10
Pre-Paid-Server
PrePaid server IP address. This optional subtype indicates the address IPv4 of the serving PPS. If present,
the Home RADIUS server uses this address to route the message to the serving PPS. The attribute may be
sent by the Home RADIUS server. Multiple instances of this subtype MAY be present in a single PPAQ. If
present in the incoming RADIUS Access-Accept message, the ASNGW should send this attribute back
without modifying it in the subsequent RADIUS Access-Request message.
the Home RADIUS server uses this address to route the message to the serving PPS. The attribute may be
sent by the Home RADIUS server. Multiple instances of this subtype MAY be present in a single PPAQ. If
present in the incoming RADIUS Access-Accept message, the ASNGW should send this attribute back
without modifying it in the subsequent RADIUS Access-Request message.
Type
9
Length
4
Value
IPv4 address
Service-ID
This value is a string that uniquely describes the service instance to which prepaid metering should be
applied.
applied.
Type
10
Length
1-246
Value
Opaque value