Cisco Cisco Packet Data Gateway (PDG) Manual De Mantenimiento
Configuration Management
Generally Available 06-30-2010
3-24
Modified Configuration Commands
This section contains configuration commands that have been modified in Release 9.0.
Modified commands in this version are divided into the following sections:
Modified commands in this version are divided into the following sections:
●
●
●
●
●
●
●
●
●
●
●
●
Common Commands - Modified in Release 9.0
This section provides information on common commands modified for Release 9.0.
configure hd raid
Configures the disk preference when both hard disks on the ST40 have valid RAID
information.
information.
CLI (HD Raid Configuration Mode
[ default ] select { newer | none } disk [ -noconfirm ]
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
diameter peer-select
This command specifies the Diameter Credit Control primary and secondary host for credit
control. This command now enables specifying IMSI prefix or suffix, or IMSI prefix or
suffix ranges for peer selection. In this release, this change is only available to UMTS
networks.
control. This command now enables specifying IMSI prefix or suffix, or IMSI prefix or
suffix ranges for peer selection. In this release, this change is only available to UMTS
networks.
CLI (Credit Control Configuration Mode)
diameter peer-select peer peer_name [realm realm_name] [secondary-peer
sec_peer_name [ realm realm_name ] ] [ imsi-based { [ prefix | suffix ]
imsi/prefix/suffix_start_value } [ to imsi/prefix/suffix_end_value ]]
no diameter peer-select [ imsi-based { [ prefix | suffix ]
imsi/prefix/suffix_start_value } [ to imsi/prefix/suffix_end_value ]