Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento

Configuration Management

Generally Available    06-30-2010 

3-24

This section contains configuration commands that have been modified in Release 9.0. 
Modified commands in this version are divided into the following sections:

●

●

●

●

●

●

●

●

●

●

●

●

This section provides information on common commands modified for Release 9.0.

Configures the disk preference when both hard disks on the ST40 have valid RAID 
information. 

[ default ] select { newer | none } disk [ -noconfirm ]

This functionality is not supported at this time on the Web Element Manager.

This command specifies the Diameter Credit Control primary and secondary host for credit 
control. This command now enables specifying IMSI prefix or suffix, or IMSI prefix or 
suffix ranges for peer selection. In this release, this change is only available to UMTS 
networks.

diameter peer-select peer peer_name [realm realm_name] [secondary-peer 

sec_peer_name [ realm realm_name ] ] [ imsi-based { [ prefix | suffix ] 

imsi/prefix/suffix_start_value } [ to imsi/prefix/suffix_end_value ]]

imsi/prefix/suffix_start_value } [ to imsi/prefix/suffix_end_value ]