Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento
Generally Available 06-30-2010
New Configuration Commands
3-63
rab-modify-procedure
This command configures how the RAB (radio access bearer) assignment procedure will be
modified
modified
CLI (RNC Config Mode)
rab-modify-procedure { normal-modify | release-and-establish }
default rab-modify-procedure
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
ranap
This command enables or disables the inclusion of the Signalling Indication IEs in various
RANAP messages depending upon circumstances.
RANAP messages depending upon circumstances.
CLI (Radio Network Controller Service Configuration Mode)
ranap { signalling-indication-ie { rab-assignment-request [
relocation-request ] | relocation-request [ rab-assignment-request ] }
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
re-authenticate
Enables or disables the re-authentication feature.
CLI (RNC Config Mode)
re-authenticate [ access-type { gprs | umts }
remove re-authenticate
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
release-compliance
Configures data rate management per RNC by defining the 3GPP release compliance (R6 or
R7) of the RNC.
R7) of the RNC.
CLI (RNC Config Mode)
release-compliance { pre-release-7 | release-7 }
default release-compliance
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.