Cisco Cisco Packet Data Interworking Function (PDIF) Manual De Mantenimiento

Generally Available 06-30-2010

New Configuration Commands

3-65

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

sctp-max-out-strms

This command sets the maximum number of outbound streams for a specific PSP.

CLI PSP Configuration Mode)

sctp-max-out-strms max#_out_streams

default sctp-max-out-strms

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

sctp-suppress-alarm

This new command is added to enable/disable the suppression of alarms for SCTP path
failure between two peer endpoints.

CLI (PSP Configuration Mode)

[no] sctp-suppress-alarm path-failure self-end-point-address

orig_ipv4_address peer-end-point-address peer_ipv4_address

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

setup-timeout

This new command sets the maximum number of seconds allowed for session setup.

CLI (GPRS Service Configuration Mode)

[default] setup-timout seconds

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.

sgsn-context-request

This new command tells the system to perform or to skip the PTMSI signature check

if the

PTMSI signature is not included in the SGSN context request.

CLI (GPRS Service Configuration Mode)

[default] sgsn-context-request ptmsi-signature-absence allowed

Web Element Manager Path

This functionality is not supported at this time on the Web Element Manager.