Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Service Configuration Procedures
Session Continuity Support ▀
Cisco ASR 5000 Series Access Service Network Gateway Administration Guide ▄
OL-22953-01
Step 1
Enter the configuration mode by entering:
The following prompt appears:
Step 2
Enter context configuration mode by entering:
context_name is the name of the system context designated for HA service configuration. The name must be from 1 to
63 alpha and/or numeric characters and is case sensitive.
63 alpha and/or numeric characters and is case sensitive.
The following prompt appears:
Step 3
Enter the following command to create the HA service:
ha_service_name is the name designated for the HA service. The name must be from 1 to 63 alpha and/or numeric
characters and is case sensitive.
characters and is case sensitive.
The following prompt appears:
Step 4
Enter the following command to configure the HA service for WiMAX and 3GPP2:
Step 5
Enable 3GPP2-WiMAX interworking for session continuity with dual access device:
Step 6
Return to the Exec mode by entering the following command:
Step 7
Save your configuration as described in Saving Your Configuration.