Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
IP Security
ISAKMP Policy Configuration ▀
Cisco ASR 5000 Series Enhanced Feature Configuration Guide ▄
OL-22982-01
ISAKMP Policy Configuration
This section provides instructions for configuring ISAKMP policies on the system. ISAKMP policy configuration is
only required if the crypto map type is either ISAKMP or Dynamic.
only required if the crypto map type is either ISAKMP or Dynamic.
Important:
This section provides the minimum instruction set for configuring ISAKMP policies on the system.
For more information on commands that configure additional parameters and options, refer to the Context Configuration
Mode Commands and ISAKMP Configuration Mode Commands chapters in the Command Line Interface Reference.
Mode Commands and ISAKMP Configuration Mode Commands chapters in the Command Line Interface Reference.
To configure the ISAKMP policy for IPSec:
Step 1
Configure crypto transform set by applying the example configuration in the
Step 2
Verify your ISAKMP policy configuration by following the steps in the
section.
Step 3
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
Configuring ISAKMP Policy
Use the following example to create the ISAKMP policy on your system:
Notes:
<
> is the system context in which you wish to create and configure the ISAKMP policy.
<
> dictates the order in which the ISAKMP policies are proposed when negotiating IKE SAs.
For more information on parameters, refer to the ISAKMP Configuration Mode Commands chapter in the
Command Line Interface Reference.