Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
IP Security
▀ LAC Service Configuration to Support IPSec
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
LAC Service Configuration to Support IPSec
This section provides instructions for configuring LAC services to support IPSec.
Important:
These instructions are required for compulsory tunneling. They should only be performed for
attribute-based tunneling if the Tunnel-Service-Endpoint, the SN1-Tunnel-ISAKMP-Crypto-Map, or the SN1 -Tunnel-
ISAKMP-Secret are not configured in the subscriber profile.
ISAKMP-Secret are not configured in the subscriber profile.
These instructions assume that the LAC service was previously configured and system is ready to serve as an LAC
server.
server.
Important:
This section provides the minimum instruction set for configuring an LAC service to support IPSec
on the system. For more information on commands that configure additional parameters and options, refer to the
Command Line Interface Reference.
Command Line Interface Reference.
To configure the LAC service to support IPSec:
Step 1
Modify LAC service configuration by following the steps in the
Step 2
Verify your LAC service configuration by following the steps in the
Step 3
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
Modifying LAC service to Support IPSec
Use the following example to modify an existing LAC service to support IPSec on your system:
Notes: