Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
MSID and PCF Zone Based Call Redirection
Configuring MSID and PCF Zone Based Call Redirection ▀
Cisco ASR 5000 Series Enhanced Feature Configuration Guide ▄
OL-22982-01
Configuring MSID and PCF Zone Based Call Redirection
This section describes the process of setting up MSID and PCF zone based call redirection from the command line
interface.
interface.
Caution:
Incorrect configuration of the MSID and PCF Zone based Call Redirection features could result in
sessions failing to be established. For example, if PDSN1 is configured to redirect sessions to PDSN2 while PDSN2 is
configured to redirect sessions to PDSN1, a loop is created in which all sessions would fail to be connected. In addition,
sessions will not be established if the PDSN to which the sessions are being redirected is unavailable.
configured to redirect sessions to PDSN1, a loop is created in which all sessions would fail to be connected. In addition,
sessions will not be established if the PDSN to which the sessions are being redirected is unavailable.
Configuring MSID Based Call Redirection
To configure MSID based call redirection, you must create a new policy that defines a wildcard match list, a list of
PDSNs to redirect to, and their respective weights.
PDSNs to redirect to, and their respective weights.
Important:
Commands used in the configuration samples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Configure MSID based call redirection by applying the following example configuration:
Notes:
You may repeat the policy msid-match command as needed, to a maximum of 16 wildcard MSIDs per PDSN
service.
Save your configuration as described in the Saving Your Configuration chapter.