Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
MSID and PCF Zone Based Call Redirection
▀ Configuring MSID and PCF Zone Based Call Redirection
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
Configuring PCF Zone Based Call Redirection
To configure PCF zone based call redirection, you must create a new policy that defines a zone match list, a list of
PDSNs to redirect to, and their respective weights.
PDSNs to redirect to, and their respective weights.
Important:
Commands used in the configuration samples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
To configure PCF zone based call redirection:
Step 1
Set parameters by applying the following example configuration:
Notes:
You may repeat the
<pcf_ip_address>
[
] [
] command as
necessary. You can configure up to 32 PCF zones per PDSN service.
You may repeat the
{
} [
] [ <
[ weight
]...<
[
] ] command as necessary, up to a maximum of 32 defined PCF zones and 16 defined
PDSNs per PDSN service.
Step 2
Save your configuration as described in the Saving Your Configuration chapter.