Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
QoS Management
Configuring Dynamic QoS Renegotiation ▀
Cisco ASR 5000 Series Enhanced Feature Configuration Guide ▄
OL-22982-01
Configuring Dynamic QoS Renegotiation
This section describes how to configure per-APN based Dynamic QoS Renegotiation.
Caution:
For Dynamic QoS Renegotiation, two RADIUS attributes are required for remote subscriber
configuration. For a particular subscriber, these attributes can be overridden without considering the timeout for
Dynamic QoS Renegotiation and whether Dynamic QoS Renegotiation is enabled or not.
Dynamic QoS Renegotiation and whether Dynamic QoS Renegotiation is enabled or not.
To configure Dynamic QoS Renegotiation:
Step 1
Configure an Access Control List (ACL), as described in the
section.
Step 2
Configure an APN for Dynamic QoS Renegotiation as described in the
Step 3
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
Step 4
Important:
Commands used in the configuration examples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Configuring ACL for Dynamic QoS Renegotiation
Configuring an ACL and applying it to an APN template are required to specify permission and treatment levels for
Dynamic QoS Renegotiation.
Dynamic QoS Renegotiation.
Use the following example to configure an ACL for Dynamic QoS Renegotiation:
Notes:
must be the name of the destination context in which you want to configure the ACL. The
same context must be used for APN configuration.