Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Content Filtering Service Configuration
▀ Configuring the System for Content Filtering Support
▄ Cisco ASR 5000 Series Content Filtering Services Administration Guide
OL-22959-01
Configuring the System for Content Filtering Support
This section lists the high-level steps to configure a system with Content Filtering service in conjunction with the
Enhanced Charging Services.
Enhanced Charging Services.
C
AUTION
:
Before proceeding with the configuration, refer the Additional Requirements on Chassis for Content
Filtering section of the Content Filtering Support Overview chapter for the minimum system requirements. If the system
has fewer than two processing cards, Content Filtering service cannot be activated on the system.
has fewer than two processing cards, Content Filtering service cannot be activated on the system.
To configure the system for Content Filtering service:
Step 1
Set the initial configuration parameters such as activating the processing cards and creating the VPN context by
applying the example configurations in the
applying the example configurations in the
Step 2
Enable the Enhanced Charging Service with Content Filtering, and configure Content Filtering parameters:
For URL Blacklisting support, enable the Enhanced Charging Service by applying the example configurations
presented in the
–and/or–
For Category-based Content Filtering support, enable the Enhanced Charging Service by applying the example
configurations presented in the
Step 3
Save the changes to system configuration by applying the example configuration in the
section.
Initial Configuration
Step 1
Specify the role of the processing cards in the chassis by applying the example configuration in the
Step 2
Set local system management parameters by applying the example configuration in the
section.
Step 3
Create the context where the service will reside by applying the example configuration in the
section.
Step 4
Create the service within the newly created context by applying the example configuration in the Service Configuration
chapter of the System Administration Guide.
chapter of the System Administration Guide.
Activating Processing Cards
The following example activates two processing cards, placing one in active mode and labeling the other as redundant: