Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Peer-to-Peer Detection Configuration
▀ Configuring System for P2P Detection Support
▄ Cisco ASR 5000 Series Peer-to-Peer Detection Administration Guide
OL-22960-01
Configuring System for P2P Detection Support
This section lists the high-level steps to configuring the system with enhanced charging services for P2P Detection
support in conjunction with ECS services.
support in conjunction with ECS services.
To configure the system for P2P Detection support with ECS:
Step 1
Set initial configuration parameters such as activating PACs/PSCs and modifying the local context as described in the
Step 2
Enable the Enhanced Charging service with P2P and set basic ECS parameters such as service configuration, Ruledefs,
charging actions, and EDRs as described in the
charging actions, and EDRs as described in the
Step 3
I
MPORTANT
:
Commands used in the configuration examples in this section provide base functionality to the
extent that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Initial Configuration
To perform initial system configuration for P2P detection support with ECS:
Step 1
Specify the role of the PACs/PSCs in the chassis as described in the
Step 2
Enable ACS as described in the
Step 3
Activating PACs/PSCs
Use the following configuration example to activate two PACs/PSCs, placing one in ―active‖ mode and labeling the
other as redundant:
other as redundant: