Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Troubleshooting the System
Detecting Faulty Hardware Using Component LEDs ▀
Cisco ASR 5000 Series System Administration Guide ▄
OL-22969-02
Figure 13. SPC LED Locations
The possible states for all SPC LEDs are described in the sections that follow.
SPC RUN/FAIL LED States
The SPC's RUN/FAIL LED indicates the overall status of the card. This LED should be green for normal operation.
The possible states for this LED are described in the following table. If the LED is not green, use the troubleshooting
information in the table to diagnose the problem.
information in the table to diagnose the problem.
Table 19.
SPC RUN/FAIL LED States
Color
Description
Troubleshooting
Green
Card powered with no
errors detected
errors detected
None needed.
Blinking
Green
Green
Card is initializing
and/or loading software
and/or loading software
This is normal operation during boot-up.
Red
Card powered with
error(s) detected
error(s) detected
Errors were detected during the POSTs. It is likely that the errors were logged to the
system's command line interface during boot.
system's command line interface during boot.