Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Configuring Management Settings
Configuring System SNMP Settings ▀
Cisco ASR 5000 Series System Administration Guide ▄
OL-22969-02
Configuring System SNMP Settings
The system uses the SNMP to send traps or events to the Web Element Manager server or an alarm server on the
network.
network.
In order for the system to communicate with those devices, configure SNMP settings.
Important:
Commands used in the configuration samples in this section provide base functionality. The most
common commands and keyword options are presented. In many cases, other optional commands and keyword options
are available. Refer to the Command Line Interface Reference for complete information.
are available. Refer to the Command Line Interface Reference for complete information.
To configure the system to communicate with the WEM server or an alarm server, enter:
Step 1
Configure SNMP parameters such as UDP port, and alarm server target by applying the example configuration in the
Step 2
To view your new SNMP configuration, follow the steps in the
Step 3
Save the configuration as described in the Verifying and Saving Your Configuration chapter.
Configuring SNMP and Alarm Server Parameters
Use the following example to set SNMP and alarm server parameters: