Cisco Cisco Aironet 1530i Outdoor Access Point Notas de publicación
2
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 15.3(3)JA10
OL-31537-01
Contents
Warning
Install only Cisco IOS Release 15.3(3)JA1 and newer releases on Cisco Aironet Universal Access
Point models. Do not install older Cisco IOS release on Cisco Aironet Universal Access Point models
as that is a violation of local radio regulations and laws.
Point models. Do not install older Cisco IOS release on Cisco Aironet Universal Access Point models
as that is a violation of local radio regulations and laws.
Contents
These release notes contain these sections:
•
•
•
•
•
•
•
Introduction
The Cisco access point is a wireless LAN transceiver that acts as the connection point between wireless
and wired networks or as the center point of a standalone wireless network. In large installations, the
roaming functionality provided by multiple access points enables wireless users to move freely
throughout the facility while maintaining uninterrupted access to the network.
and wired networks or as the center point of a standalone wireless network. In large installations, the
roaming functionality provided by multiple access points enables wireless users to move freely
throughout the facility while maintaining uninterrupted access to the network.
System Requirements
You can install the 32 MB Cisco IOS Release 15.3(3)JA10 on all 802, 1040, 1140, 1260, 1550, 1600,
2600, 3500, and 3600 series access points. New APs 702 and 1530 support 128 MB minimum flash and
AP 3700 supports 64 MB minimum flash.
2600, 3500, and 3600 series access points. New APs 702 and 1530 support 128 MB minimum flash and
AP 3700 supports 64 MB minimum flash.
Finding the Cisco IOS Software Release
To find the version of Cisco IOS software that is running on your access point, use a Telnet session to
log into the access point, and enter the show version EXEC command.
log into the access point, and enter the show version EXEC command.
On access points running Cisco IOS software, you can also find the software release on the System
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.