Cisco Cisco Aironet 1530i Outdoor Access Point Guía De Instalación

Open your Internet browser. You must use Microsoft Internet Explorer 6.0.2800 or a later release.

Enter https://IP address (where IP address is the controller’s IP address) in the browser address line 
and press Enter. A user login screen appears.

Enter the username and password and press Enter. The controller’s summary page appears.

The username and password are case-sensitive.

Click Wireless and choose 802.11a/n or 802.11b/g/n under Access Points / Radios . A list of associated 
access points appears.

Choose the desired access point from the displayed list and click Configure from the drop down arrow. 
The radio configuration page appears.

Scroll to the Tx Power Level Assignment field, and click Custom.

Custom indicates that the radio output power is manually controlled by the Tx Power Configuration 
setting field.

In the Tx Power Level field, select the appropriate power level setting (1 to 5). 

 lists the corresponding conducted power levels for each of the controller power level settings. 

Click Apply.

Close your Internet browser.

These documents provide information about the controllers and access points:

Cisco Wireless LAN Controller Installation and Configuration Guide—describes installation, 
configuration, and logging into Cisco Wireless LAN Controllers.

Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide—describes the access 
point's hardware installation and specifications.

Getting Started Guide: Cisco Aironet 1530 Series Outdoor Access Point—provides a product 
overview and basic instructions for getting a 1530 series access point connected to a wireless LAN.

1

15

25

2

12

22

3

9

19

4

6

16

5

3

13