Cisco Cisco Aironet 340 Access Point-RP-TNC Guía De Información
Q. What is the typical range of a base station?
A. The indoor range (typical home environment) and outdoor range of
a base station depends upon the speed:
a base station depends upon the speed:
Indoor Range
100 ft (30m) at 11 Mbps
300 ft (90m) at 1 Mbps
Outdoor Range
300 ft (90m) at 11 Mbps
1000 ft (300m) at 1 Mbps
Q. Can I roam between base stations?
A. No, no roam function is built into the base station.
Q. How can I manage the base station?
A. The base station does not have a console connector. Configure the
base station with one of these methods:
base station with one of these methods:
Install the Base Station Client Utility (BSCU) on the Wireless
client. Ensure that the client gets an IP address through DHCP
from the base station. This IP address must be in the
192.168.200.x range. Then launch BSCU and configure the
base station.
client. Ensure that the client gets an IP address through DHCP
from the base station. This IP address must be in the
192.168.200.x range. Then launch BSCU and configure the
base station.
Type http://192.168.200.1 into the Address or Location field
of your web browser. The base station comes pre-configured
with this IP address. When this IP address is typed into the
browser, a connection with the base station is established.
of your web browser. The base station comes pre-configured
with this IP address. When this IP address is typed into the
browser, a connection with the base station is established.
Issue the telnet command at a command prompt, as shown:
> telnet 192.168.200.1
Association
Q. How many clients can I associate to the base station?
A. You can associate a maximum of 253 clients to a base station. You
can lease 100 IP addresses from the DHCP server of the base station.
Additional clients must use static IP addresses between
192.168.200.102 and 192.168.200.254.
can lease 100 IP addresses from the DHCP server of the base station.
Additional clients must use static IP addresses between
192.168.200.102 and 192.168.200.254.
Q. Can a base station associate with a Workgroup Bridge?
A. Yes, a Workgroup Bridge and a base station can associate with
each other if the base station is in Access Point mode.
each other if the base station is in Access Point mode.
Q. Where can I find the radio frequency (RF) association table?