Cisco Cisco Aironet 1400 Wireless Bridge Guía De Instalación

Cisco Aironet 1400 Series Wireless Bridge Rooftop or Wall Mount Assembly Instructions

78-15704-01

Assembling the Mount

Figure 1

shows the correct locations for the three bolts.

Figure 1

Mount Bolt Locations

To assemble the mount, follow the instructions below:

Step 1

Place a washer on the long flanged hex bolt.

Step 2

Place the end of the mast pipe with the bolt holes into the mounting plate (see

Step 3

Align the holes in the mast pipe with the holes in the mounting plate.

Step 4

Insert the long flanged hex bolt and washer into the upper holes on the mounting plate and through the
mast pipe (see

Step 5

Place a washer and hex nut on the end of the long flanged hex bolt and hand-tighten.

Step 6

Position the mast pipe and mounting plate as shown in

Step 7

Align the lower square hole in the mast pipe with the semi-circular cut-out on the mounting plate.

Step 8

Place the carriage bolt into the square hole on the inside of the mast pipe.

Step 9

Place a washer and hex nut on the end of the carriage bolt and hand-tighten.

Step 10

Repeat Steps 8 and 9 for the other square hole.

Long flanged hex bolt

Carriage bolt

88949