Cisco Cisco Aironet 1400 Wireless Bridge Guía De Instalación

To attach the mounting bracket to a large mast, follow these steps:

Position the mounting bracket next to the mast such that the arrow on the bracket points up.

Attach the mounting bracket to the pole using two guillotine-style U bolts and four hex nuts. Be sure to 
use U bolts that fit the mast in use.

If you are using the integrated antenna, loosely tighten the U bolts so you can move the antenna 
horizontally to position it.

To attach the bridge to the mounting bracket, follow these steps:

Attach the bridge housing bracket to the mounting bracket by sliding the hang pins on the housing 
bracket into the hang pin slots on the mounting bracket. The connectors should face downward for 
vertical polarization (See 

).

Guillotine-style U bolt (user supplied).
See http://www.mcmaster.com

Large mast, 2.5 to 4.5 inches
(63.5 to 115 mm) in diameter

88749