Cisco Cisco Aironet 1400 Wireless Bridge Guide De Montage
12
Cisco Aironet 1400 Series Wireless Bridge Mounting Instructions
OL-7618-01
Assembling the Mounting Hardware
To attach the mounting bracket to a large mast, follow these steps:
Step 1
Position the mounting bracket next to the mast such that the arrow on the bracket points up.
Figure 5
Mounting Bracket Assembly for a Large Mast
Step 2
Attach the mounting bracket to the pole using two guillotine-style U bolts and four hex nuts. Be sure to
use U bolts that fit the mast in use.
use U bolts that fit the mast in use.
Note
If you are using the integrated antenna, loosely tighten the U bolts so you can move the antenna
horizontally to position it.
horizontally to position it.
Attaching the Bridge to the Mounting Bracket
To attach the bridge to the mounting bracket, follow these steps:
Step 1
Attach the bridge housing bracket to the mounting bracket by sliding the hang pins on the housing
bracket into the hang pin slots on the mounting bracket. The connectors should face downward for
vertical polarization (See
bracket into the hang pin slots on the mounting bracket. The connectors should face downward for
vertical polarization (See
).
1
Guillotine-style U bolt (user supplied).
See http://www.mcmaster.com
See http://www.mcmaster.com
2
Large mast, 2.5 to 4.5 inches
(63.5 to 115 mm) in diameter
(63.5 to 115 mm) in diameter
1
2
88749
MOUNT
UP
0
15
15