Cisco Cisco Aironet 350 Workgroup Bridges Guía De Instalación
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2001. Cisco Systems, Inc. All rights reserved.
78-11082-03
Mounting Instructions for the Cisco Aironet
Access Points, Base Stations, and
Workgroup Bridges
Access Points, Base Stations, and
Workgroup Bridges
April 14, 2001
This document provides instructions for mounting the Cisco Aironet 340 and 350 Series Access Points,
the Cisco Aironet 340 Series Base Station, or the Cisco Aironet 340 and 350 Series Workgroup Bridges.
the Cisco Aironet 340 Series Base Station, or the Cisco Aironet 340 and 350 Series Workgroup Bridges.
Contents
•
•
•
Installation Guidelines
Because the Access Point, base station, and bridge are radio devices, they are susceptible to RF
obstructions and common sources of interference that can reduce throughput and range. Follow these
guidelines to ensure the best possible performance:
obstructions and common sources of interference that can reduce throughput and range. Follow these
guidelines to ensure the best possible performance:
•
Install the Access Point, base station, or bridge in an area where large steel structures such as
shelving units, bookcases, and filing cabinets will not obstruct radio signals being transmitted or
received.
shelving units, bookcases, and filing cabinets will not obstruct radio signals being transmitted or
received.
•
Install the Access Point, base station, or bridge away from microwave ovens and 2-GHz cordless
phones. These products can cause signal interference because they operate in the same frequency
range as the Access Point, base station, or bridge.
phones. These products can cause signal interference because they operate in the same frequency
range as the Access Point, base station, or bridge.