Cisco Cisco Aironet 1310 Access Point Bridge Notas de publicación
2
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 12.4(25d)JA2
OL-23880-01
Introduction
Introduction
The Cisco Aironet Access Point is a wireless LAN transceiver that acts as the connection point between
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
You can configure and monitor 520, 1040, 1100, 1130, 1140, 1200, 1240, 1250, and 1260 series access
points, and 1300 and 1400 series access points and bridges by using the command-line interface (CLI),
the web-browser interface, or Simple Network Management Protocol (SNMP).
points, and 1300 and 1400 series access points and bridges by using the command-line interface (CLI),
the web-browser interface, or Simple Network Management Protocol (SNMP).
System Requirements
You can install the 32-Mb Cisco IOS Release 12.4(25d)JA2 on all 1040, 1130, 1140, 1240, 1250, and
1260 series access points.
1260 series access points.
Finding the Cisco IOS Software Release
To find the version of Cisco IOS software running on your access point, use a Telnet session to log into
the access point, and enter the show version EXEC command. This example shows command output
from an access point running Cisco IOS Release 12.4(25d)JA2:
the access point, and enter the show version EXEC command. This example shows command output
from an access point running Cisco IOS Release 12.4(25d)JA2:
ap1260AG> show version
Cisco IOS Software, C1260 Software (AP3G1-K9W7-M), Version 12.4(25d)JA2
Copyright (c) 1986-2012 by Cisco Systems, Inc.
On access points running Cisco IOS software, you can also find the software release on the System
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Upgrading to a New Software Release
Follow these steps for instructions on upgrading your access point or bridge software:
Step 1
Follow this link to the Cisco home page:
Step 2
Click Support. The Support and Documentation page appears.
Step 3
Under the Select a Product Name, click Wireless. The Product/Technology Support page appears.
Step 4
Under the Make a Selection to Continue section, click Access Point. Products and Access Point are
highlighted.
highlighted.
Step 5
Select the access point model for which you need the information. For example, click the Cisco Aironet
1260 Series. A list of documents appears.
1260 Series. A list of documents appears.
Step 6
Click Configure. A list of configuration documents appears.
Step 7
Click Cisco IOS Software Configuration Guide for Cisco Aironet Access Points, 12.4(25d)JA.