Cisco Cisco Aironet 1310 Access Point Bridge Notas de publicación

Click Cisco IOS Software Configuration Guide for Cisco Aironet Access Points.

For information on Cisco IOS software, click this link to browse to the Cisco IOS Software Center on 
Cisco.com: 

This maintenance release does not introduce new features. 

This section contains information that you should keep in mind when installing 1130, 1140, 1240, 1250 
series access points, and 1300 and 1400 series access points/bridges.

This section contains installation notes for access points.

Cisco Aironet 1130, 1140, 1240, and 1250 Series Access Points provide adequate fire resistance and low 
smoke-producing characteristics suitable for operation in a building's environmental air space, such as 
above suspended ceilings, in accordance with Section 300-22(C) of the National Electrical Code (NEC) 
and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.

The power injector does not provide fire resistance and low smoke-producing characteristics and is not 
intended for use in extremely high or low temperatures or in environmental air spaces such as above 
suspended ceilings.

This section describes issues that you should consider before applying power to an access point.

Cisco Aironet power injectors are designed for use only with Cisco Aironet access points and bridges. 
Do not use the power injector with any other Ethernet-ready device. Using the power injector with other 
Ethernet-ready devices can damage the equipment.