Cisco Cisco Aironet 350 Access Points Notas de publicación

To download the conversion utility or the upgrade image, click this link to browse to the Cisco IOS 
Software Center on Cisco.com:

On the Cisco IOS Software Center page, enter your Cisco.com username and password to use the Feature 
Navigator or the Cisco IOS Upgrade Planner, or click Wireless Software to go to the Wireless LAN 
Software page. Download the conversion utility or the upgrade image for 350 or 1200 series access 
points. You can also download instructions for using the utility and the image.

The upgrade to Cisco IOS software is permanent. You cannot revert to non-IOS software after the 
upgrade. Product warranties do not cover unintended upgrades. 

When you upgrade an access point to run Cisco IOS software, some fields that are reported in the console 
messages during the upgrade are blank or are populated with zeros. However, blank or zero fields are 
normal after a successful upgrade, because 350 and 1200 series access points do not support that 
information. This example shows fields that might appear blank or populated with zeros:

32K bytes of flash-simulated non-volatile configuration memory.

Base Ethernet MAC Address: 00:05:9A:38:42:91

Part Number

:

0-0000-00

PCA Assembly Number

:

000-00000-00

PCA Revision Number

:

PCB Serial Number

:

Top Assembly Part Number

:

000-00000-00

Top Assembly Serial Number

:

Top Revision Number

:

Product/Model Number

:

AIR-AP352-IOS-UPGRD

Cisco IOS Release 12.2(13)JA2 does not provide any new features but supports all the features of the 
previous software release.

This section lists new features in Cisco IOS Release 12.2(13)JA for access points. 

 lists the 

features that are supported on the devices that support this release. 

Cisco Aironet 1400 Series Wireless Bridges do not support any of the new features in this 
release. This release provides only caveat resolution support for 1400 series bridges.

Radio management

x

x

x

Radio Management Aggregation

—

x

x