Cisco Cisco Aironet 1310 Access Point Bridge Guía De Instalación

The access point default (out-of-the-box) username, password, and enable password are all Cisco (case 
sensitive).

You must remove the serial cable from the console port when your configuration is complete.

AP# lwapp ap ip address 10.0.0.14 255.255.255.0

AP# lwapp ip default-gateway 10.0.0.1

AP# lwapp controller ip address 10.21.11.21

AP# lwapp ap hostname LAP1300

Where LAP1300 is the access point name on the controller.

AIR-LAP1310G-x-K9 has a single integrated antenna and is not configurable for antenna selection 
(diversity/left/right). The x represents your regulatory region.

AIR-LAP1310G-x-K9-R has two external antenna connectors and does not ship with an antenna 
because many different external antennas can be used with this product to cover various 
environments and applications. You must install one or two external antennas. The x represents your 
regulatory region. For additional information on antennas and accessories, refer to this URL:

If two diversity antennas are installed, Cisco recommends that you configure Diversity for the 
antenna receive and antenna transmit settings on your controller. 

If only one antenna is installed, Cisco recommends that you connect it to the right RP-TNC 
antenna connector and that you configure Right (Primary) for the antenna receive and antenna 
transmit settings on your controller.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks 
can be found at 

. Third party trademarks mentioned are the property of their respective owners. The use of the word 

partner does not imply a partnership relationship between Cisco and any other company. (1005R)