Cisco Cisco Aironet 350 Access Points Notas de publicación

You must have a Cisco Aironet 340 or 350 series Access Point to install firmware version 11.02.

Your Access Point must be running firmware version 10.x or later to install firmware version 11.02.

The firmware version number appears in the upper-left corner of most Access Point management screens 
in the browser interface and at the top of the home (Summary Status) page in the command-line 
interfaces.

For instructions on installing Access Point firmware:

Click on the following link to go to the Cisco Aironet documentation home page on CCO:

http://www.cisco.com/univercd/cc/td/doc/product/wireless/index.htm

Use the following link path to go to the product, document and chapter:
Aironet 350 Series Wireless LAN Products > Cisco Aironet 350 Series Access Points > Cisco 
Aironet Access Point Software Configuration Guide > Maintaining Firmware > Updating Firmware

Disable User Manager protection on your Access Point before upgrading from version 10.12 to 11.x. 
User Manager passwords created in version 10.12 are scrambled during the upgrade, and you need 
to recreate them in version 11.x. Passwords created in versions 10.13 or later are not affected.

To upgrade firmware from a file server, you must enter settings on the Access Point’s FTP Server 
Setup page. Consult the “Updating from a File Server” section on page 5-5 in the Cisco Aironet 
Access Point Software Configuration Guide for more information.