Cisco Cisco Aironet 350 Access Points Notas de publicación
10
Release Notes for Cisco Aironet 340 and 350 Series Access Points and 350 Series Bridges Running VxWorks Firmware Version 12.03T
OL-4150-01
Caveats
•
CSCdy83165—Access points no longer lose connectivity.
•
CSCdx81372—The access point now accepts version 11.21-generated ini file.
•
CSCdz03100—340 series bridge links are now stable when you replace a 340 series bridge with a
350 series bridge.
350 series bridge.
•
CSCdz07823—An access point in hot standby mode no longer sporadically associates with its
parent access point.
parent access point.
•
CSCdz09445—Spanning Tree Protocol now works with MIC on 350 bridges.
•
CSCdz32962—Enabling MIC no longer causes immediate hot standby takeover by the standby unit.
•
CSCdz34132—Aironet Client Utility (ACU) now displays IP address with EAP-TLS instead of
MAC address.
MAC address.
•
CSCdz38726—Eliminated possible confusion for exiting console.
•
CSCdz41180—The Clear Alert Statistics button in the Event Handling Setup page is correctly
documented.
documented.
•
CSCdz47442—IP Setup Utility (IPSU) returns incorrect IP addresses in large networks.
This caveat is closed. Based on testing, the problem occurs only with old VxWorks or IOS software
releases. If a network has mixed access points with old and new software releases, the problem may
exist. Upgrading all access points to a new software release eliminates the problem.
releases. If a network has mixed access points with old and new software releases, the problem may
exist. Upgrading all access points to a new software release eliminates the problem.
•
CSCdz48575—The access point now defaults to No Action on loss of Ethernet.
•
CSCdz61465—Build process no longer fails with the latest IEEE MIB file version 6.2.
•
CSCdz67252—The access point no longer becomes unresponsive when issuing a Telnet :?
command.
command.
•
CSCdz77680—The 350 series bridge no longer fails when handling a large amount of traffic.
•
CSCea09515—VxWorks access points now provide three EAP retries.
•
CSCea27480—A partial configuration is no longer applied when an error in the ini file is
encountered.
encountered.
•
CSCea30474—The time zone can now be configured with SNTP enabled.
•
CSCea41998—The 350 series access point no longer disconnects when CDP is enabled.
•
CSCea45758—Documentation describing EAP authentication has been expanded and corrected.
•
CSCea66535—The hot standby feature now works with LEAP, TKIP, MIC, and Broadcast key
rotation.
rotation.
•
CSCeb18758—Documentation now better explains workgroup bridge limitations in network
infrastructure mode.
infrastructure mode.
See the
for more information.
•
CSCin46076—Client now gets DHCP IP address with EAP-MD5 and VLAN.