Cisco Cisco Aironet 350 Access Points Notas de publicación

Release Notes for Cisco Aironet 340 and 350 Series Access Points and 350 Series Bridges Running VxWorks Firmware Version 12.04

OL-5157-01

Installation Notes

Power Considerations

Caution

The operational voltage range for 350 series access points and bridges is 24 to 60 VDC, and the nominal
voltage is 48 VDC. Voltage higher than 60 VDC can damage the equipment.

Caution

Cisco Aironet power injectors are designed for use with 350 series access points and 350 series bridges
only. Do not use the power injector with any other Ethernet-ready device. Using the power injector with
other Ethernet-ready devices can damage the equipment.

System Requirements

You must have a 340 or 350 series access point or a 350 series bridge to install VxWorks firmware
version 12.04.

Version Supported

Your access point must be running VxWorks firmware version 10.x or later to install VxWorks firmware
version 12.04. Your bridge must be running version 11.07 or later to install VxWorks firmware version
12.04.

Upgrading to a New Firmware Release

Determining the VxWorks Firmware Version

The VxWorks firmware version number is in the upper-left corner of most management screens in the
web-browser interface and at the top of the home (Summary Status) page in the command-line interface.

Upgrade Procedure

Follow these instructions to install access point and bridge firmware:

Step 1

Follow this link to the Software Center on Cisco.com and download VxWorks firmware version 12.04:

http://www.cisco.com/public/sw-center/sw-wireless.shtml

Step 2

Select Option #1: Aironet Wireless Software Selector. The Aironet Wireless Software Selector
window appears.

Step 3

Click the drop-down arrow to view the valid values for the Product Type field.

Step 4

Click Access Point or Wireless Bridge.

Step 5

Click Submit. The Step 2 of 3 page appears.

Step 6

Click the drop-down arrow to view the valid values in the Model Number field.