Cisco Cisco Aironet 350 Wireless Bridge Manual Técnica
Wireless Domain Services AP as an AAA Server
Configuration Example
Configuration Example
Document ID: 68098
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Configure
Configure the WDS AP
Configure the Infrastructure AP
Configure Client Authentication Method
Verify
Troubleshoot
Related Information
Prerequisites
Requirements
Components Used
Conventions
Background Information
Configure
Configure the WDS AP
Configure the Infrastructure AP
Configure Client Authentication Method
Verify
Troubleshoot
Related Information
Introduction
This document provides a sample configuration for configuring an Access Point (AP) to:
Provide Wireless Domain Services (WDS).
•
Perform the role of an Authentication, Authorization, and Accounting (AAA) server.
•
You can use this kind of setup when you do not have an external RADIUS server to authenticate infrastructure
APs and client devices that participate in WDS.
APs and client devices that participate in WDS.
Prerequisites
Requirements
Ensure that you meet these requirements before you attempt this configuration:
Basic knowledge of WDS
•
Knowledge of current Extensible Authentication Protocol (EAP) security methods
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco Aironet 1200 series APs that run Cisco IOS® Software Release 12.3(7)JA1
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.