Cisco Cisco Aironet 350 Access Points Notas de publicación

Descargar
Página de 18
 
16
Release Notes for Cisco Aironet 350, 1100, and 1200 Series Access Points for Cisco IOS Release 12.2(13)JA1
OL-5170-01
Caveats
CSCea89985—The access point no longer generates a traceback when you configure hot standby 
mode using a broadcast MAC address to specify the access point to be monitored. 
CSCea91378—When you run a carrier busy test on the web-browser interface when the access point 
radio is disabled, the web-browser interface no longer reports that the test failed. 
CSCea91424—When a CCKM client device roams successfully to a foreign network using proxy 
Mobile IP, the access point no longer displays error messages.
CSCeb06139—When several mobile clients are using Cisco Centralized Key Management 
(CCKM), the access point no longer reboots when you enter the show wlccp wds mn detail 
command. 
CSCeb15588—The access point now accepts the aironet RADIUS attribute in the Cisco 
vendor-specific attribute (VSA), and the Cisco PEAP supplicant now works correctly with Cisco 
ACS version 3.1.1.
CSCeb36095—Access points running Cisco IOS software now send the same RADIUS 
NAS-port-type value as access points running VxWorks.
CSCeb36192—The access point now assigns user VLANs correctly whether or not multiple SSIDs 
are configured.
CSCeb39541—The default EAP client timeout (the length of time that the access point waits for a 
client to respond to the access point’s EAP request) has changed from 10 seconds to 30 seconds.
CSCeb47892—You can now use the web-browser interface to disable the access point radio after 
setting the role in radio network to Access Point Root (Fallback to Radio Shutdown).
CSCeb48645—Client devices in power-save mode no longer lock up when associated to an access 
point running Cisco IOS software.
CSCeb52239, CSCec20465—The access point now correctly assigns VLANs to devices connected 
to a workgroup bridge.
CSCeb60581—The access point now sends the correct username with RADIUS accounting packets.
CSCeb69596—You can now enter the letters in MAC addresses using either upper-case or 
lower-case letters when using the web-browser interface to configure MAC-address filtering or 
authentication.
CSCeb76171—The web-browser interface now displays pages correctly when a message-of-the-day 
(MOTD) banner is configured on the CLI.
CSCeb79465—The access point with a spectralink wireless phone now sends buffered data.
CSCeb87628—Client devices using PEAP authentication now authenticate successfully through the 
access point.
CSCeb87982—The access point now correctly displays hot standby status and event messages.
CSCec00308—Efficient Speedstream DHCP server now responds to Cisco IOS DHCP discover 
packets.
CSCec07703—Cisco 7920 IP Phones no longer drop calls when associated to 1100 and 1200 series 
access points.
CSCec12813—Client devices in power-save mode no longer lose packets when they wake up.
CSCec15572—You can now use the [noboot upgrade global configuration command to configure 
the access point to boot without loading a configuration.
CSCec21082—The access point now reports accurate statistics for ifOutUcastPkts on radio 
interfaces.